THERMWELL 36-Inch Aluminum Drip Cap & Door Bottom Combination
36", Aluminum Drip Cap & Door Bottom Combination, Fits 1-3/4" Doors, U-Shaped Door Bottom With Drip Cap, Seals Between Bottom Of Door & Threshold To Block Out Air & Moisture, Slotted Fastener Holes Allow Easy Installation & Adjustment.
BrassCraft BRASS CRAFT SERVICE PARTS Delta Acrylic Single-Lever Handle Cap
Acrylic, Delta, Single Lever Handle Cap, 1 Per Bag, OEM Reference #Df7676
THERMWELL - Threshold Insert, Brown Vinyl, 1.5 x 36-In.
Brown Vinyl Threshold Insert, Replacement For Macklanburg Duncan Thresholds, Model #AP118, AP150, AP334.
C.R. Laurence CRL Polycarbonate "h" Jamb 180 Degree for 3/8" Glass
This CRL Clear Polycarbonate "h" Jamb is for use on 180 degree inline glass-to-glass applications. Snap onto the fixed panel with the lip on the strike side, or onto the door with the lip on the hinge side. Leaves a clear appearance while serving as a functional seal. Entire "h" Jamb is made of hard polycarbonate.
Hy-Ko #BR-42PB/8 4" PB Prestige Number 8 [Misc.] [Misc.]
4" house number, dimensional, high quality. Polished brash finish. Mounting screws included. No. BR 42PB 0: 0 No. BR 42PB 1: 1 No. BR 42PB 2: 2 No. BR 42PB 3: 3 No. BR 42PB 4: 4 No. BR 42PB 5: 5 No. BR 42PB 6: 6 No. BR 42PB 7: 7 No. BR 42PB 8: 8 No. BR 42
CR Laurence CRL Brass Glass Door Pivot Hinges
Create beautiful showcases and stereo cabinets using 1/4 and 5/16 inch (6 to 8 millimeter) tempered glass with our CRL Glass Door Pivot Hinges. They are available in chrome and brass finishes. Each package contains one top and one bottom hinge with pivot bushings. Note: The maximum recommended door width is 14 inches (356 millimeters). Maximum weight should not exceed 20 pounds (9 kilograms). Minimum clearance required is 3/16 inch (4.8 millimeters) both top and bottom. If door is larger use Cat. No. EH324.
Hillman Fasteners 9031 "2-Pack" License Plate Bolt (Pack of 10)
2 Pack, Slotted License Plate Bolt, Zinc Plated.
CR Laurence CRL Bronze Right Hand "Trimline" Cam Handle Lock
The CRL Trimline Cam Handle Lock contains nylon strike inserts to accommodate various mounting applications. The nylon inserts snap into the strike plate opening and are either 7/32 or 11/32 inch (5.6 and 8.7 millimeter) high. One locking handle, strike housing, two strike inserts and installation screws per package.
CR Laurence CRL Brass Strike Plate With Finger Grip
This CRL Strike Plate has a finger grip to make it easier to use with our Magnetic Latches. Installs over top edge of 3/16 or 1/4 inch (5 to 6 millimeter) glass door. Three finishes, Chrome, Black and Brass are available to match our Glass Door Hinges. Measures 1-9/16 x 27/32 inches (39.7 x 21.4 millimeters) with a 3/8 inch (9.5 millimeter) grip.
Gilmour ACE CHAIN DOOR GUARD 3-3/8"
Ace Chain Door Guard 3-3/8 For Exterior Doors To Allow Security While Allowing Door To Open Slightly Clamshell Discovery Acc Chrome References National# 273-615 All items sold new in original packaging
National Hardware 4PK BRS Hanger Plate
4 Pack, 2"L x 9/16"W, Bright Brass, Hanger Plate, Carded.
BELWITH PRODUCTS LLC Chrome Key Patio Door Lock
Chrome Keyed Patio Door Lock, Interior & Exterior Use, Locks In Closed Or Vented Position, Non-Removable Screws, Rotating Bolt Prevents Sawing.
Belwith P9175-BLN 1.25 Inch x .75 Inch Oval Knob Solid Brass-Black Nickel Knob
Size:Small, Finish:Black Nickel Enhance the elegance of your cabinetry with the Power & Beauty Collection by Belwith KeelerA?.
Mintcraft 3.5IN SATNKL RES SQUARE HINGE
2.2mm thickness, 5-knuckle, loose pin.
CR Laurence CRL Chrome Traditional Movable Glass-To-Glass Transom Glass Clamp
This CRL Movable Glass-to-Glass Transom Clamp can be used to pivot transom panels above the shower door. Wall Mount and Glass-to-Glass Clamps can be used in any combination, depending upon the configuration of the enclosure. Includes mounting screws and gaskets.SPECIFICATIONS:Material: Solid BrassGlass Thickness Range: 5/16 to 1/2 Inch (8 to 12 millimeter)Hole Size Required: 5/8 or 3/4 Inch (16 or 19 millimeter) Hole in Fixed Panel. Notch in Transom.Includes: Mounting Screws and Gaskets
Shlage SCHLAGE LOCK CO 3-In. Bronze Coat & Hat Hook
3" Projection, Aged Bronze Coat & Hat Hook, Solid Brass, Bulk.
Rusticware 945WP 3 In. On Center Bin Pull
Finish/Color:Weathered Pewter Traditional Collection Decorative Bin Pull for your cabinets in the most popular styles for your home.
Prime Line Prod. 181508 Spline Latch
6 Pack, Stamped Aluminum, Mill Finish, Window Screen Bottom Latch, Slips Into Spline Channel, Retained With Spline, Used To Hold Window Sreens Onto Double Hung Windows.
Prime Line Prod. 161998 Bi-Pass Door Roller
2 Pack, Wardrobe Door Roller, For Door, Front, Top Hung, Center Groove 7/8" OD Nylon Wheel, Adjustable Steel Bracket, Fits Old Style Kenna Frame.
CR Laurence CRL Satin Chrome Ceiling Mount "Sleeve Over" Glass Clamp
CRL Sleeve-Over Glass Clamps were designed with two purposes in mind. The first is to provide a mechanical fastener to assist with shear forces placed on the glass panels. The second is to provide a securing clamp that would hold the glass panels in position while the sealant applied in the joint cures (the silicone sealant glues the glass panels together, prevents water leakage, and provides the pull strength to keep panels from separating). Clamps are secured to glass by a nylon tipped Allen screw.
BrassCraft BRASS CRAFT SERVICE PARTS 2-Pack Price Pfister Cross-Style Polished Chrome Lavatory Faucet Handle With Buttons
2 Pack, Polished Chrome, Price Pfister Cross Style Lavatory Faucet Handle With Buttons.
NATIONAL MFG/SPECTRUM BRANDS HHI Sash Lift, Bar Type, Satin Nickel, 4-In.
V170, 4", Satin Nickel, Sash Lift, Bar Type Pull/Lift Designed For Windows, Cabinets, Doors, Drawers, Etc., Offers Attractive, Easy Grip Design, Fits A Variety Of Applications, Manufactured From Steel, Visual Pac.
CR Laurence CRL 54" Jalousie Strip Hardware - 15 Blades
This CRL Jalousie Strip Hardware is pre-assembled and ready to be installed in the window opening. Strip hardware is packaged in pairs (enough for one window), and includes one left side strip and one right side strip with lever operator, mounting screws included. It is designed for four inch (101.6 millimeter) glass strips. Head and Sill weather striping is not included and needs to be ordered separately. CRL Jalousie hardware is handed on the right side when viewed from the inside. If you want left, a quote would need to be submitted before an order is placed.How To Measure For Louver Windows: Measure the exact width and height of opening at the point of installation. For openings with a sloping sill, measure the height of the outside of intended louver jamb channel location.
C.R. Laurence CRL Copper T-Crank Window Handle With 3/8" Spline Size for Pella
Replacing casement operator handles with die cast CRL T-Crank Handles allows for the uninterrupted sight lines of today's modern window treatments. This handle has a special deep 3/8" (9.5 mm) spline size and is fits Pella brand window hardware. Two handles per package.
Hillman Fasteners 100Pk 3/8-16X3/4 Bolt 190159 Hex Bolts Grade Zinc
100 Pack 3/8-16 X 3/4" Hex Bolt, Low Carbon Steel, Coarse Thread.
CR Laurence CRL Chrome 39" Wall Mounted Support Bar
This CRL Through-Glass Mounted Support Bar creates a means of support that strengthens an enclosure's structural integrity. It eliminates the use of a header, and can be mounted to a wall or to the ceiling. The versatile design allows for mounting glass-to-wall, and glass-to-ceiling. Requires a 5/8 inch (16 millimeter) hole in glass, and comes in finishes to match our Hinges and Pull Handles. All mounting hardware included.
CR Laurence CRL Oil Rubbed Bronze 8" Back-To-Back Solid Brass 3/4" Diameter Pull Handles with Metal Washers
These CRL Solid Brass Pull Handles offer a selection of Back-to Back or Single-Sided styles, with choice of an economical "no washer" type, or the traditional style pull with 1-1/4 inch (32 millimeter) diameter metal washers. The Back-To-Back Handle includes a pull for each side of the door, and is commonly used frameless shower door applications. The Single-Sided Handle has a 1/8 inch (3 millimeter) protruding end cap, and is commonly used for by-passing doors, cabinets and wardrobe doors. All Pull Handles are offered in a choice of six and eight inch (152 and 203 millimeter) sizes, and are stocked in finishes to match most bathroom decors. Custom finishes are also available on special order by contacting CRL Technical Sales.Specifications:Material: 3/4 inch (19 millimeter) Diameter Solid Brass RodGlass Thickness Range: 1/4 to 1/2 Inch (6 to 12 millimeter)Hole Diameter Required: 1/2 Inch (12 millimeter)Six Inch Hole Spacing: Six Inch (152 millimeter) Center to CenterEight Inch Hole Spacing: Eight Inch (203 millimeter) Center to Center
Prime Line Slide-Co 25Pk Scr Plunger Latch Pl 14660 Window & Screen Hardware [Misc.]
25 Pack, Die Cast, Window Screen Plunger Latches, For 3/4" x 3/8" Or 7/16" Frame Nylon Cap.
Thermwell Frost King A58/36H Premium Aluminum And Vinyl Door Sweep 1-5/8-Inch by 36-Inches, Gold
1-5/8" x 36", Brite Gold Aluminum & Vinyl Door Bottom.
CR Laurence CRL Colonial Screen and Storm Door Push Button Latch With 1-3/4" Screw Holes
Add distinctive styling to your screen or storm door with a CRL Colonial Push Button Latch. The black hammered finish and Colonial styling make this a very attractive and popular latch. It has interior locking and a no-lockout feature. It works on outswinging doors from 1 to 1-1/4 inches (25.4 to 31.8 millimeters) thick. One outside handle and latch with strike and installation screws per package.
Compx Timberline Timberline Lockbar
Lock bar can move up or down 1/2" in dado allowing or preventing drawer movement
CR Laurence CRL Brass Keyed Alike Lock for Cabinet Swinging Glass Door
CRL Plated Locks for Double Swinging Glass Doors in Cabinets are available in both chrome and brass plated finishes. Easy to install after drilling a 3/4 inch (19 millimeter) hole, these attractive cam style locks will bring added security to cabinets with double glass doors up to 1/4 inch (6 millimeter) thick. Locks come complete with two keys, front plate, strike plate, straight cam, washer and hex nut. Customers needing extra keys can order LKEY which is the blank key for this lock.
C.R. Laurence CRL Almn Plastic Speak-Thru Hole Frame
This CRL Plastic Speak-Thru Hole Frame is an easy to snap together unit for inside installations. It conceals roughly ground or chipped hole edges and creates an attractive appearance. It fits 4 inch (102 millimeter) diameter holes and is adjustable for 3/16 inch to 1/4 inch (5 to 6 millimeter) thick glass. Leaves an inside diameter hole of 3-7/16 inches (87 millimeters).
Prime Line Slide-Co 12Pk 3/8' Mill Scr Clip Pl 7736 Window & Screen Hardware [Misc.]
12 Pack, 3/8", Mill Finish, Die Cast Screen Clips With Screws, Carded.
Prime Line Prod. 1901-B Flat Shower Door Roller
2 Pack, 3/4" Outside Diameter, Flat Tire, Tub Enclosure Sliding Shower Door Roller, Ball Bearing With Threaded Hex Hub.
Combo PACK Keyed entry & single cylinder
COMBO PACK Keyed entry & single cylinder deadbolt Tulip knob 2-3/4'-2-3/4' back set Keyed alike in pairs Clamshell Satin Chrome US26D
YALE SECURITY INC. Jimmy-Proof Surface-Mounted Double-Cylinder Deadbolt
Jimmy Proof, Double Cylinder Deadlock, Two Hardened Steel Interlocking Deadbolts, Operated By Key Outside, Key Inside, Sprayed Bronze.
CR Laurence CRL 34" Tubular Spiral Tilt Window Balance Red Bushing
These CRL Tubular Spiral Window Balances for tilt type windows will replace a 9/16 inch (14.3 millimeter) metal or plastic tube balance with a sash load capacity of up to 25 pounds (11.3 kilograms). It will also replace the same size spiral balance with a white bushing. The 9/16 inch (14.3 millimeter) size of the metal tube is commonly referred to as 5/8 inch (15.9 millimeter) in the industry. While this balance is packaged and sold individually, it is our recommendation that both balances in the window be replaced at the same time.How to Order Tubular Spiral Window Balances1. Check the tube diameter of the metal or plastic tube on the old balance.2. Measure the tube length from the end of the balance to the bottom of the colored nylon bushing only. Do not include the rod extension.3. Check the color of the nylon bushing.4. Verify that the rod extension protruding from the nylon bushing matches what is shown.5. Match tube diameter, tube length, nylon bushing color against the information shown next to the Catalog Number. If all agree, and the rod extension matches the one in the photo, then this is the correct balance.
ClosetMaid ClosetMaid220 Over-The-Door Utility Hook
White, Over The Door Utility Hook, All Hardware Included To Mount Unit Over A Door Or Directly To The Wall, Easy To Assemble.
Shlage Schlage Lock Co 1-18' Ab Dbl Hook Sc582mb-609 Clothing Hooks
1-1/8" Projection, Antique Brass Double Wardrobe Hook, Carded.