CR Laurence CRL Brass Glass Door Pivot Hinges
Create beautiful showcases and stereo cabinets using 1/4 and 5/16 inch (6 to 8 millimeter) tempered glass with our CRL Glass Door Pivot Hinges. They are available in chrome and brass finishes. Each package contains one top and one bottom hinge with pivot bushings. Note: The maximum recommended door width is 14 inches (356 millimeters). Maximum weight should not exceed 20 pounds (9 kilograms). Minimum clearance required is 3/16 inch (4.8 millimeters) both top and bottom. If door is larger use Cat. No. EH324.
Gilmour ACE CHAIN DOOR GUARD 3-3/8"
Ace Chain Door Guard 3-3/8 For Exterior Doors To Allow Security While Allowing Door To Open Slightly Clamshell Discovery Acc Chrome References National# 273-615 All items sold new in original packaging
Midwest Air Technologies 1-3/8X5/8Galv Gatehinge
1-3/8x5/8 gatefram hinge. 1-3/8" x 5/8" for chainlink fence. Uses 3/8" x 2" carriage bolt.
Mintcraft 3.5IN SATNKL RES SQUARE HINGE
2.2mm thickness, 5-knuckle, loose pin.
Prime Line Prod. 181508 Spline Latch
6 Pack, Stamped Aluminum, Mill Finish, Window Screen Bottom Latch, Slips Into Spline Channel, Retained With Spline, Used To Hold Window Sreens Onto Double Hung Windows.
Prime Line Slide-Co 25Pk Scr Plunger Latch Pl 14660 Window & Screen Hardware [Misc.]
25 Pack, Die Cast, Window Screen Plunger Latches, For 3/4" x 3/8" Or 7/16" Frame Nylon Cap.
CR Laurence CRL Colonial Screen and Storm Door Push Button Latch With 1-3/4" Screw Holes
Add distinctive styling to your screen or storm door with a CRL Colonial Push Button Latch. The black hammered finish and Colonial styling make this a very attractive and popular latch. It has interior locking and a no-lockout feature. It works on outswinging doors from 1 to 1-1/4 inches (25.4 to 31.8 millimeters) thick. One outside handle and latch with strike and installation screws per package.
Compx Timberline Timberline Lockbar
Lock bar can move up or down 1/2" in dado allowing or preventing drawer movement
NATIONAL MFG/SPECTRUM BRANDS HHI Black Out-Swing Thumb Latch
Black Out Swinging Thumb Latch, Designed For Out Swinging Doors Up To 1-3/4" Thick, Handle Mounts On The Face Or Pull Side Of Door, Offers Ornamental Design, Easy To Install, Designed For Right Or Left Hand Applications, Carded.
HAMPTON PRODUCTS-WRIGHT Wright Products International V777 Screen and Storm Door Latch Knob, Aluminum
Universal, Aluminum Finish, Tulip Knob Latch, For Out Swing Wood Or Metal Doors 3/4" To 1-1/8" Thick, Installs In 1-1/2", 1-3/4" Or 3" Hole Spacing, All Installation Hardware Included.
C.R. Laurence CRL 8" 4-Bar Standard Duty Stainless Steel Friction Hinge
This non-handed CRL 4-Bar Hinge is made out of stainless steel and is designed for standard windows. The hinge is designed for use with both project-out awning windows and also casement windows that have a lip on the outside edge of the sash. The hinge mechanism allows the sash to project out from the frame before it pivots.
Amerock CM9793PT Catch Pack Magnetic QTY Latch, Plastic Tan
Case Quantity:200 pieces, Finish:Plastic Tan Catch Pack; Magnetic (2) #6 T.H. x 1/2'; (1) #5 F.H. x 1/2' Sold in packs of 200.
Gilmour ACE FOOT BOLT 6"
Ace Foot Bolt 6 Zinc Trip Lever Release Bolt Has 7/8 Throw References National# 151-027 Clamshell Discovery Acc, Con, Nbr, Sup, Hwu All items sold new in original packaging
NATIONAL MFG/SPECTRUM BRANDS HHI National Mfg. N342626 MaxLatch Sag Compensating Latch [Misc.] [Misc.]
Black Max Latch Sag Compensating Latch, Floating Bar Adjust To Compensate For Over 1/2" Of Gate Sag, Can Be Padlocked For Added Security, Designed For Right Or Left Hand Applications, Carded.
NATIONAL MFG/SPECTRUM BRANDS HHI National Mfg. N114975 Adjustable Full-Surface Spring Hinge
V125, 2 Pack, Black, Adjustable Spring Hinge, Provide Desired Closing Speed For A Variety Of Applications, Full Surface Application, No Mortising Required, Tight Pin For Either Right Or Left Hand Applications, Heavy Duty, Manufactured From Cold Rolled St
Hickory Hardware P185-UW 1.5 In. Natural Woodcraft Unfinished Wood Cabinet Knob
About Belwith Based out of Grandville, MI, Belwith hosts three core brands under their over-arching name. Fueled from innovative processes through technical means and unique and visionary designs, Belwith leads the industry in decorative hardware while their products represent their commitment to quality craftsmanship and attention to detail. Their experienced designers, engineers, and master craftsman yield the highest quality of decorative hardware for any type of setting and decor style. Their knowledgeable customer service team is second to none and always happy to assist with all your needs. Made of wood. Transitionally styled knob in round shape. Specially designed for drawer fronts and cabinets. Includes mounting hardware. Available in a variety of sizes.
CR Laurence CRL Brass Wide Face Glass-to-Glass Out-Swing Set Screw Hinge
Our CRL Wide Face Glass-to-Glass Out-Swing Set Screw Hinges can be incorporated into an unlimited number of showcase and stereo cabinet designs with glass running in a 180 degree plane. Clean smooth finishes and easy operation is what you get when fabricating with these easy-to-install hinges with plastic faced set screws for no-drill attachment. The maximum recommended door width is 16 inches (406 millimeters). Maximum weight should not exceed 8 pounds (3.6 kilograms). One pair per package.
Amerock BP3429-3 Variable Overlay Modern Face Mount Self-Closing Hinge, Brigh...
2-3/4" pb overlay hinge. Steel. Self-closing, face mount, variable overlay hinge. 2-3/4" x 1-7/8". 2-pack. Polished brass (3)
NATIONAL MFG/SPECTRUM BRANDS HHI National Mfg Co 2Pk 7' Blk Gate Hinge N165-480 Ornamental Gate Hinge [Misc.]
2 Pack, 7", Satin Black, Ornamental T Gate Hinge, With Screws.
NATIONAL MFG/SPECTRUM BRANDS HHI Black In-Swing Thumb Latch
Black In Swinging Thumb Latch, Designed For Use With Doors & Gates Up To 1-3/4" Thick & In Swinging Doors, Handle Mounts On The Face Or Push Side Of Door, Easy To Install, Designed For Right Or Left Hand Applications, Carded.
Ace Trading Pack x 5: Ace Residential Hinge (01-3550-104)
Sold as Pack x 5. 3-1/2". Full mortise square corner. Removable pin. Clamshell. Satin chrome. References National# 142-893. Manufacturer number: 01-3550-104. SKU #: 5297098. Country of origin: China. Distributed by Ace Trading Bhdw 3.
Suncast Mh8D Metal 8 Inch Double Hook
Ideal for long handled tools and more. Heavy duty wire construction. Mounts easily to slat wall, drywall, or stud. Rust resistant powder coated finish. Nonslip protective coating helps keep tools from scratching. Color: Blue.
HAMPTON PRODUCTS-WRIGHT Wright Products #V909 Aluminum Tuli Storm DR Latch [Misc.] [Misc.]
Keyed knob latch. For outswinging wood or metal storm or combination doors 3/4" to 1-1/8" thick. Positive locking system, merely set lock and close door. Installs with three 1/2" holes. Installation hole spacing is 3". Backset from jamb is 13/16". Skin packaged for display. Zamac aluminum finish.
CR Laurence CRL 20" 4-Bar Hinge - Truth Hardware
The CRL 4-Bar Hinges are made out of zinc plated steel. These non-handed hinges are designed for use with both project-out awning windows and also casement windows that have a lip on the outside edge of the sash. The 4-Bar Hinge mechanism allows the sash to project out from the frame before it pivots. This hinge is made by Truth Hardware. One hinge per package.
CR Laurence CRL Aluminum Screen and Storm Door Push Button Latch With 1-3/4" Screw Holes
This CRL Push Button Latch combines handsome, modern styling with a rugged, durable construction. It is designed for wood or metal outswinging storm or screen doors from 5/8 to 1-1/4 inches (15.9 to 31.8 millimeters) thick and comes complete with a night lock. Each package contains one outside handle, inside latch, strike and installation screws.
Stanley 757802 - 2-1/2" Brass Tone(ST4C) Barrel Bolt
Stanley 757802 - 2-1/2" Brass Tone(ST4C) Barrel BoltStanley is proud of its reputation for excellence. They are dedicated to continually testing, designing and improving their products to ensure quality and maximum function. Maintaining their standing of being the world's best at what they do is important to them and what you expect from a name like Stanley. Stanley 757802 - 2-1/2" Brass Tone(ST4C) Barrel Bolt Features:; Multi-purpose barrel bolt for average weight doors ; Long throw for maximum security ; Reversible, strike engages at either end of bolt ; Surface strike furnished with bolt ; Satin Brass ; Carded ; 75-7802: 2-1/2" ; 75-7931: 3" ; 75-8062: 4" ; 75-8340: 5"
Amerock #Bp3441-Bb 3" Burnish Brs Cab Pull
3-3/8" bb harmony pull. 3" center. 3-3/8" long. Burnished brass (BB) finish
Bommer HINGE FLOOR SPRING US4 [Misc.]
Bommer 7801 Light Duty Spring Pivot, Horizontal Type Light duty model with floor plate Features: Mounts into cut out at bottom of door with 7890 top pivot assembly at top corner of door and frame Malleable iron and steel mechanism Steel trim Antifriction bearing Double acting Hold open at approximately 85 degrees Non-adjustable spring tension Non-handed Standard Packaging
CR Laurence CRL Chrome Set Screw Pull
CRL Chrome Set Screw Pulls add function and style to your glass showcases and stereo cabinet installations. Installs easily and quickly with a screwdriver. There's no need to drill an attachment hole so your fabrication costs stay minimal. One pair per package.
Prime Line Slide-Co Wht Scr Hangers/Latch Pl 8103 Window & Screen Hardware
Screen hanger set for wood single and double hung windows. Fits 3/8'' wide frames.
Seachoice Pr 1-5/8X2.5 Stainless Steel Hinge
Pair, 1-5/8" x 2.5", Stainless Steel, Extruded Butt Hinges, Fast Pin Type, Uses #8 Fasteners.
Household Essentials Hinge It Spacemaker Triple Hook
Behind-the-door storage mounts on a single hinge. Swivels for easy access. Easy installation at door hinge: pop the pin and drop it in. Fits most standard doors. Protective cap protects hanging garments and helps keep them on the bar. Instantly provides two places to hang towels, robes, clothes or accessories easily. White color. 10 in. W x 1 in. D x 24 in. H (1.60 lbs.). Hinge it space maker triple towel hooks saves you space and money. It hangs on the hinge of your door, so you can store robes and towels quickly and conveniently. Using the corner space in a room, where most doors are, better uses the space you have. Keeps clutter off your floor and doesn't overwhelm small rooms. Triple-hook holds more than a traditional towel bar, so more people have a place to hang-dry their towels. Hang drying actually saves you money by reducing how frequently towels are washed, thus preserving the quality of your towel longer and reducing your energy consumption. It's a simple solution to a common conundrum.
National Mfg. N211177 Narrow Hinge [Misc.] [Misc.]
National catalog model No. V1800. Miniature brass. This narrow hinge is designed to add a decorative appearance to small chests, jewelry boxes, craft projects, etc. Product's decorative design and solid brass material makes it ideal for crafts, small chests, and jewelry boxes. Surface mount. Made of solid brass. Screws included. No. N211177: 1'' x 3 4'', solid brass, 4 pack No. N211185: 1'' x 3 4'', antique brass, 2 pack No. N211193: 3 4'' x 5 8'', solid brass, 4 pack No. N211201: 3 4'' x 5 8'', antique brass, 2 pack No. N211219: 1 1 2'' x 7 8'', solid brass, 2 pack No. N211227: 1 1 2'' x 7 8'', antique brass, 2 pack No. N211235: 2'' x 1'', solid brass, 2 pack No. N211243: 2'' x 1'', antique brass, 2 pack No. N211250: 2 1 2'' x 1 1 8'', solid brass, 2 pack No. N211268: 2 1 2'' x 1 1 8'', antique brass, 2 pack
Card: Ace Removable Pin Cabinet Hinge (01-3131-107)
Sold as Card. Narrow. Satin brass. Full mortise, removable pin. Max. door weight: 2 hinges= 13lbs., 3 hinges=20lbs. Clamshell/2. 3" Tall. References National# 146-852. Manufacturer number: 01-3131-107. SKU #: 5298161. Country of origin: China. Distributed by Ace Trading Bhdw 7.
CR Laurence CRL Brass Geneva Shower Pull and Hinge Set
This CRL Shower Pull and Hinge Set consists of one each BM6x6 Tubular Back-To-Back Pull Handle that has hole spacing of six inches (152.4 millimeters) Center-to-Center, and two each Geneva 037 Series Wall Mount Full Back Plate Standard Hinges. We've made it easier for you to get two of our most popular Hinge and our best-selling Pull Handle by combining them in one easy-to-order set. These Wall Mount Hinges or Top and Bottom Mount Pivot Hinges make up over 90 percent of our demand.
CR Laurence CRL Chrome Double Glass-to-Glass Inline Hinges
For glass-to-glass inline applications. CRL Brass Double Glass-to-Glass 180 Degree Return Hinges are made of forged brass construction with a screw attachment feature. Clear vinyl pad inserts protect glass. Available in polished brass with lacquered finish or chrome plated. Requires 1/2 inch (12 millimeter) holes in glass for mounting. The maximum recommended door width is 22 inches (559 millimeters) and maximum weight should not exceed 30 pounds (13.6 kilograms). One pair per package.
NATIONAL MFG/SPECTRUM BRANDS HHI 1-Pair 8-Inch Hook/ Strap Gate Hinge
Pair 8", Screw Hook & Strap Hinge.
W4 Flush Hinge (Pack Of 2)
Brass flush hinge. Pack of 2. Designed for use with cupboards, cabinets and other storage units. Perfect as a spare or replacement part. Dimensions: L4.5in x W3in x D0.4in.
SPECIAL SPEECO PRODUCTS Specail Speeco #Gl16101 2 Way Latch Lock Gate
2 Way, Latch Lockable Gate, Fits Round Tube Gates From 1-5/8" To 2" O.D., Gate Can Swing Either Direction When Latch Is Released, Designed To Accept Padlock.
Brainerd Manufacturing BRAINERD MFG CO/LIBERTY HDW Chrome Overlay Hinges, 2-Pk.
2 Pack, Chrome Plated, Overlay Hinge Without Spring.