CR Laurence CRL 90 Degree Magnetic Profile for Glass-To-Glass fits 5/16" and 3/8" Glass
This CRL Magnetic Profile provides positive door closure for glass-to-glass applications. It is made of co-extruded material with soft magnetic receiver and will accommodate 1/4 to 3/8 inch (6 to 10 millimeter) Glass.APPLICATION:180 Degree Glass-to-Glass: Use PMA10 and PMB10 (Door swings in one direction)180 Degree Glass-to-Glass: Use PMC10 and PMC10 (Door swings in both directions)135 Degree Glass-to-Glass: Use PMd10 and PMe10 (Door swings out only)90 Degree Glass-to-Glass: Use PMA10 and PMB10 (Reverse for polarity-door swings out only)
Triton Products 75230 DuraHook 3-3/4-Inch Curved 3-3/32-Inch I.D. Zinc Plated Steel Pegboard Hook for DuraBoard or 1/8 Inch and 1/4 Inch Pegboard, 10-Pack
Use in pairs to hold power tools including drills, caulk guns and many other long items Innovative double locking system locks the hook in place with a locking tab that mounts to the pegboard from the front Use on any 1/8-inch or 1/4-inch pegboard or tool board Hooks mount vertically and horizontally in 4 distinct positions allowing the use of multiple hooks for large, heavy and odd-shaped items Fixtures install from the front, so no need to remove the board for installation or repositioning of durahooks
Berenson Hardware 9710-1BPN-P Pull
Hole Spacing Options:2.5, Finish Options:Brushed Nickel
Westinghouse 2pk White Swag Hooks Set
2 Pack, White Swag Hooks Set, Includes Hooks, Sping Toggle Wings, 2 Running Thread Studs, 2 Wood Screws,.
Schlage MAXIMUM SECURITY DEADBOLT
Schlage Maximum Security Deadbolt 2-3/8 Or 2-3/4 Backset Single Cylinder Keyed Differently One Piece 10 Yr Finish Warranty Lifetime Mechanical Warranty Visual Pack Bright Chrome Finish (625) All items sold new in original packaging
C.R. Laurence CRL Gold Plated 6" Back-to-Back Solid Brass 3/4" Diameter Pull Handles with Metal Washers
These CRL Solid Brass Pull Handles offer a selection of Back-to Back or Single-Sided styles, with choice of an economical "no washer" type, or the traditional style pull with 1-1/4 inch (32 millimeter) diameter metal washers. The Back-To-Back Handle includes a pull for each side of the door, and is commonly used frameless shower door applications. The Single-Sided Handle has a 1/8 inch (3 millimeter) protruding end cap, and is commonly used for by-passing doors, cabinets and wardrobe doors. All Pull Handles are offered in a choice of six and eight inch (152 and 203 millimeter) sizes, and are stocked in finishes to match most bathroom decors. Custom finishes are also available on special order by contacting CRL Technical Sales.Specifications:Material: 3/4 inch (19.1 millimeter) Diameter Solid Brass RodGlass Thickness Range: 1/4 to 1/2 Inch (6 to 12 millimeter)Hole Diameter Required: 1/2 Inch (12 millimeter)Six Inch Hole Spacing: Six Inch (152 millimeter) Center to CenterEight Inch Hole Spacing: Eight Inch (203 millimeter) Center to Center
Knape & Vogt 8400P Full Extension Drawer Slide, 24-Inch
24" Zinc Heavy Duty Drawer Slide, 100 LB Class, Full Extension, Side Mount, 1 Pair Per Polybag With Screws Included.
C.R. Laurence CRL Charcoal Fiberglass 54" Screen Wire - 100' Roll
CRL Charcoal Fiberglass Screen Wire is fade proof, rust proof and dent proof. Its easy to cut, easy to install screening made with a consistent 18 X 16 mesh of unparalleled quality. It will remain attractive for years and is excellent for patio door, window and porch screens. Chose from widths of 18 to 72 inches (457 to 1,828 millimeters) all of which can be assorted for quantity pricing. CRL Fiberglass Screen Wire is also available in gray color and some sizes in bulk 600 foot rolls. There are additional CRL Screen Wire materials available that you may also wish to consider:Heavy-Duty Fiberglass Screen WireAluminum Screen WirePaw-Proof Pet Screen WireGalvanized Screen WireSolar Guard Screen WireIn addition to these quality screen wires, C.R. Laurence offers a complete line of screening supplies and tools including: Screen SplineScreen FrameScreen Frame CornersScreening HardwareScreen Fabricating Tools All CRL Screen Wire ships one roll per package.
Daido Roller Chain Offset Link
2 Pack, #60 Offset Link, ANSI.
Berenson Hardware 7079-9SS-C Knob
Finish Options:Stainless Steel, Size Options:0.98 Dia.
Hillman Fastener Corp 40072 Wood Screw [Misc.] [Misc.]
Flat Phillips head. 100 pieces per box. No. 40003: 4 x 1 2 No. 40004: 4 x 3 4 No. 40005: 4 x 1 No. 40009: 5 x 5 8 No. 40012: 6 x 1 2 No. 40013: 6 x 5 8 No. 40015: 6 x 3 4 No. 40018: 6 x 7 8 No. 40021: 6 x 1 No. 40024: 6 x 1 1 4 No. 40027: 6 x 1 1 2 No. 40
Hy-Ko Prod Co 5' Solid Brs Number 2 Br-50/2 House Numbers Brass
5", Solid Brass House Number 2, Screws Included For Installation.
Hillman Fasteners Hillman 100Pk 6-32X1 Rh Screw
100 Pack, 6-32 x 1", Zinc Plated, Slotted Round Head, Machine Screw.
John Sterling RP-0091-8BRZ Scroll Shelf Bracket, 8-Inch
John Sterling RP-0091-8BRZ Scroll Shelf Bracket, 8-Inch, Bronze
BrassCraft BRASS CRAFT SERVICE PARTS Delta Acrylic Single-Lever Handle Cap
Acrylic, Delta, Single Lever Handle Cap, 1 Per Bag, OEM Reference #Df7676
THERMWELL - Threshold Insert, Brown Vinyl, 1.5 x 36-In.
Brown Vinyl Threshold Insert, Replacement For Macklanburg Duncan Thresholds, Model #AP118, AP150, AP334.
AMERIMAX HOME PRODUCTS Gutter Elbow, Corrugated Round, Galvanized, 75 Degree, 3-In.
3" Corrugated Round Galvanized Elbow, 75 Degree.
Amerock DRAWER SLIDE Euro style
Amerock C17002-22-WS Functional 22" S/C Drawer Slide, WhiteAmerock C17002-22-WS Functional 22" S/C Drawer Slide, White Features:; 3/4 extension provides stability; Self-closing feature guides drawer to fully closed position; #6 F.H. x 1/2"Amerock C17002-22-WS Functional 22" S/C Drawer Slide, White Specifications:; Collection Name: Functional; Finish: White; Length (Inches): 22; Length (mm): 558.80; Projection (Inches): 0.875; Projection (mm): 22.22; Type: Drawer Slide; Width (Inches): 0.5; Width (mm): 12.70; Model Variations: C17002-22-WS, C17002-22, C17002-22WS
Prime Line Slide Co Finger Pull 3/4
Slide Co Finger Pull 3/4 Antique Brass Pack Of 4 All items sold new in original packaging
Campbell Manufacturing Safety Rope (ESR500)
Sold as each. 1/4" x 500'. Exceeds 1000 lbs. breaking strength. Braided polypropylene. Boxed. Manufacturer number: ESR500. Country of origin: United States. Distributed by Campbell Manufacturing.
National #N118-737 7PK SB SM Screw Eye [Misc.] [Misc.]
7 Pack, Solid Brass #214, 13/16" Small Screw Eye, Designed For Exterior & Marine Applications Where Maximum Corrosion Protection Is Desired, Solid Brass For High Corrosion Resistance, Safe Working Load 10 LB, Do Not Use For Overhead Lifting, Support Of Human Weight, Athletic Or Playground Equipment, When Safety Is Involved, Consult Manufacturer, Inspect Frequently, Carded.
C.R. Laurence CRL Polycarbonate "h" Jamb 180 Degree for 3/8" Glass
This CRL Clear Polycarbonate "h" Jamb is for use on 180 degree inline glass-to-glass applications. Snap onto the fixed panel with the lip on the strike side, or onto the door with the lip on the hinge side. Leaves a clear appearance while serving as a functional seal. Entire "h" Jamb is made of hard polycarbonate.
Hy-Ko Prod Co 2' Blk Blank Sign (Pack Of 10) Rv-25/Blnk House Numbers & Letters Mylar
2', Black Adhesive Reflective Vinyl Blank Sign, Silver Background, Weather Resistant, For Commercial Or Residential Use.
WONDERLOKKING 5g Tite Chair Glue
Wonderlock'Em, 5 Gram Tite Chairs Glue, Instant Loose Wood Chair Repair, From A Little Loose To Falling Apart, Fix In Minutes, Easy To Apply, No Need To Take The Chair Apart, Just Trace The Loose Joints With Special Applicator Tip.
Hy-Ko #BR-42PB/8 4" PB Prestige Number 8 [Misc.] [Misc.]
4" house number, dimensional, high quality. Polished brash finish. Mounting screws included. No. BR 42PB 0: 0 No. BR 42PB 1: 1 No. BR 42PB 2: 2 No. BR 42PB 3: 3 No. BR 42PB 4: 4 No. BR 42PB 5: 5 No. BR 42PB 6: 6 No. BR 42PB 7: 7 No. BR 42PB 8: 8 No. BR 42
CR Laurence CRL Brass Glass Door Pivot Hinges
Create beautiful showcases and stereo cabinets using 1/4 and 5/16 inch (6 to 8 millimeter) tempered glass with our CRL Glass Door Pivot Hinges. They are available in chrome and brass finishes. Each package contains one top and one bottom hinge with pivot bushings. Note: The maximum recommended door width is 14 inches (356 millimeters). Maximum weight should not exceed 20 pounds (9 kilograms). Minimum clearance required is 3/16 inch (4.8 millimeters) both top and bottom. If door is larger use Cat. No. EH324.
Tala 3303 Pastry Cut G.Bread Boy 12.5cm by Tala
Tala 3303 Pastry Cut G.Bread Boy 12.5cm by Tala
United Gilsonite Lab 31041 Zar Latex Wood Patch [Misc.] [Misc.]
Zar, 3 OZ, Interior/Exterior Latex Red Oak Wood Patch, May Be Sanded, Sawed Or Drilled, Accepts Stain Uniformly, Greatly Diminishes The Lighter Area Or "Halo" Effect Surrounding The Patch Normally Present With Other Wood Fillers, Fills Nail Holes, Repairs
Prime-Line Wood Door Bottom Seal, 9'
Used by many wood door manufacturers. Black vinyl material retains consistency even in the coldest weather. Fits a standard 1-3/8" thick garage door. Includes 1 vinyl strip with nails.
Hy-Ko Gb-7/8 Number 8 7" Plastic
7" poly number 8. Manufactured of quality plastic. Decorative numbers and letters for indoor or outdoor use. Woodgrain texture, pre-drilled, can be used as they are or can be painted, stained, or antiqued. Eight
CR Laurence CRL Chrome Rectangular Interior Shower Shelf Clamp
CRL Solid Brass Interior Shelf Clamps can be used to secure a shelf for shampoo bottles or other lightweight shower articles. Clamps should be secured to wall with screws (not included) in studs, or with Molly-type anchors. Nylon tip brass tension screws secure the glass. Maximum five inch (127 millimeter) glass protrusion from wall is recommended. Clamps will hold 5/16 to 3/8 inch (8 to 10 millimeter) glass, with no glass fabrication required.
Berenson 8074-103-P Salem 3 Inch Handle Pull from the Timeless Charm Collection, Finish
Decorative Cabinet Pull from the Salem Collection. Made of Zinc with a Polished Brass Finish and a White Ceramic Center. Length: 5" Width: 3/4" Height: 1-1/4" Base: 3/4" Tap: 8-32 Hole Spacing: 3"
Hillman Fasteners 3' Sq Conc Screw Nail (Pack Of 5) 420 Masonry Nails
3', Square Shank Concrete Screws Nail, 6 OZ Package.
CR Laurence CRL Black Chrome Double Glass Door Lock
The CRL No-Drill Glass Door Locks can be instantly installed on glass cabinet doors up to 1/4 inch (6 millimeter) thick without drilling. Set screws and a cushioned lining hold them securely to the glass. Three elegant finishes (Chrome, Black Chrome, and Brass) are available to accent the decor of wood or laminate cabinets. You can order Single and Double Door Locks randomly keyed, or keyed alike (KA) for convenience. For blank replacement keys cut on one side order Cat. No. BKEY; for blank replacement keys cut on two sides order Cat. No. B2KEY. This no-drill lock works with double glass doors that meet in the middle. An offset 1/2 inch (12 millimeter) overlap allows one lock to hold both doors. The bolt has a 3/8 inch (10 millimeter) throw to secure it in the jamb-mounted strike plate. Each lock includes one jamb-mounted strike plate and two keys.
Prime Line 12Pk Clr Plas Supp Peg
12 Pack, 1/4" Diameter Clear Plastic Shelf Support Peg, Mini Design, Used To Support Cabinet Shelves.
Measure Pro Installation Guide Cabinet Hardware Kit
Measure Pro Installation Guide Cabinet Hardware Kit Includes Measure Pro Templates-cabinet & Drawer, 3/16 High Speed Drill Bit Carded All items sold new in original packaging
Val-A TG-16 Tear Mender Fabric and Leather Adhesive
Natural latex adhesive will bond anything it can penetrate. Strong initial tack. Remains flexible and will not flake. Permanently bonds canvas, fabrics, leather, luggage, shoes, tarps, wood crafts, and work clothing. No. TG 6H: 6 oz. No. TG 16: 16 oz.
Quickrete Sand Mix Concrete 40 Lb.
Quickrete Sand Mix Concrete 40 Lb. Cement And Fine Sand Use For Concrete Less Than 2 Thick Gray Meets Astm Bagged All items sold new in original packaging
Mintcraft 1/4Dr Standard Socket 11Mm 6Pt MT6490221
Drop forged chrome vanadium steel.
CR Laurence CRL Brass Strike Plate With Finger Grip
This CRL Strike Plate has a finger grip to make it easier to use with our Magnetic Latches. Installs over top edge of 3/16 or 1/4 inch (5 to 6 millimeter) glass door. Three finishes, Chrome, Black and Brass are available to match our Glass Door Hinges. Measures 1-9/16 x 27/32 inches (39.7 x 21.4 millimeters) with a 3/8 inch (9.5 millimeter) grip.